Service Contract Options

Residential Plumbing Inspection Contracts

Inspections Includes:

 
  • Check operation of water service valves (or well service valve
  • Check water pressure
  • Check for leaks on visible domestic water piping
  • Check outside faucets or hydrants
  • Check toilets for flushing operations
  • Perform a dye test to expose leaks
  • Check operation of plumbing fixture isolation valves
 
  • Check operation of all household faucets
  • Check washing machine valves and condition of hoses
  • Check garbage disposal
  • Check water heater gas, flue, water piping connection and operation
  • Check traps and flow on drains to each fixture
  • Check main drain trap and cleanout outside the house
 
 

Advantages for PIC Customers

  • Recommended repairs will be discounted 15% on both labor and materials if performed or scheduled at time of inspection.
  • Overtime charges for emergency services will not be applied.
  • Priority service will be given to our contract customers.
  • Worked performed is guaranteed for 1 year.
  • Maintenance of plumbing , drains, and fixtures will help reduce utility bills and avoid serious problems inside your home. Issues are found before they become a big headache.

Homeowner Cost: ……………. $79.00*

*Up to 3 bathrooms, 1 hot water heater, 1 kitchen & 1 laundry – annual fee $79.00 *Additional water heater - $35.00
*Up to 6 bathrooms, 1 hot water heater, 1 kitchen & 1 laundry – annual fee &139.00 *Additional kitchen or laundry - $25.00

PIC Contract Terms

Contract term begins at date of inspection and is valid for one year. Homeowner will be given an estimated cost for recommended repairs. Repairs will be done during the inspection visit, time permitting. Repairs involving several hours of labor may need to be scheduled. Quotes for more involved repairs may be priced by an estimator, during a separate appointment. Discount applies to recommended repairs that are performed or scheduled during the time of inspection. Discount is limited to the first $2,000.00 of repair cost. Labor and materials exceeding $2,000.00 will be charged at normal rates. Plumbing inspections will be performed during regular business hours. No guarantee is implied that plumbing devices and systems that have been deemed to be in good working order will continue to be so beyond the inspection date. Horn Plumbing & Heating, Inc. assumes no responsibility for future plumbing system failure.

 

Heating & Air Conditioning Service Maintenance Contracts

We offer service agreements for home comfort systems:

Semi-annual Service Maintenance

 

Fall & Spring Inspection & Cleaning

Gas Hot Air Furnace & Air Conditioning Systems $205.00 (per unit)
  • Check the blower motor, belts, and pulleys.
  • Check the blower motor and bearings. Oil the motor.
  • Check the exhaust motor.
  • Visual check of the heat exchanger. (If the visual check exposes a concern, another check will be required at an additional cost of $50.00)
  • Check the complete ignition system operations.
  • Clean the burners, pilot assemblies and electronic ignition parts
  • Adjust the airflow on the burners.
  • Check the fan limit controls.
  • Check the gas valve and manifold pressure,
  • Check the temperature rise and drop between the return duct and feed,
  • Check the filters. (Replacement filters and humidifier pads are not included and will be charged additionally.)
  • Check and clean flue piping.
  • Check thermostat and its operation. Check heat anticipator on the thermostat.
  • Check all electrical connections and service disconnects on the thermostat.
  • Clean indoor air handler and air conditioning evaporator coil and outdoor air conditioning condensing coil.
  • Check the compressor.
  • Check refrigerant pressures low side and high side.
  • Check refrigeration device.
  • Check capacitors.
  • Final check and operate the system.
 

Fall & Spring Inspection & Cleaning

Heat Pump/Electric Back-up System $230.00 Heat Pump/Gas Back-up System $245.00
  • Check indoor air handler filter. Replace is necessary at an additional cost.
  • Check indoor blower assembly, pulleys, belts, bearings, and the blower wheel. Check motor amps.
  • Check outdoor heat pump motor and fan blade. Check motor amps.
  • Check the heat pump thermostat and emergency electric back up operation.
  • Check crank case heater.
  • Check electric back up heating coils and sequencers.
  • Check reversing valve.
  • Check accumulator for visible oil leaks.
  • Check filters dryers.
  • Check capacitors.
  • Check service disconnects.
  • Check low voltage electrical circuits that operate the system.
  • Check compressor.
  • Check and clean the evaporator coil and condenser coil.
  • Check the temperature drop and rise from the return and feed plenums on the indoor air handler.
  • Check the system pressures with gauges on the refrigerant systems.
  • Check the gas back-up operations.
 
 

Annual Service Maintenance

Inspection & Cleaning

 

Gas Hot Air Furnace

(Fall): $125.00 per unit
  • Check the blower motor, belts, and pulleys.
  • Check the blower motor and bearings. Oil the motor.
  • Check the exhaust motor.
  • Visual check of the heat exchanger. (If the visual check exposes a concern, and check will be required at an additional cost of $50.00)
  • Check the complete ignition systems operation.
  • Clean the burners, pilot assemblies and electronic ignition parts.
  • Adjust the airflow on the burners.
  • Check the fan limit controls.
  • Check the gas valve and manifold pressure.
  • Check the temperature rise and drop between the return duct and feed.
  • Check the filters. (Replacement filters and humidifiers pads are not included and will be charged additionally)
  • Check and clean flue piping.
  • Check thermostat and its operation. Check heat anticipator on the thermostat.
  • Check low voltage wiring connections and line voltage connections to the equipment.
  • Check the service disconnects.
  • Final check and operate the system.
 

Humidifier

Annually: $60.00 per unit
  • Check the humidistat.
  • Check the motor.
  • Check the solenoid valve.
  • Check the pad on the water panel.
  • Check all electrical operations.
Note: Parts and repairs are not included in the service maintenance check.

Electronic Air Cleaner

Annually: $60.00
  • Check pre-filter.
  • Check the ionizers.
  • Check the electrical operations.
  • Check for operation in manual and auto positions
Note: Parts and repairs are not included in the service maintenance check.
 
 

Gas Hot Water Boiler

(Fall) $140.00 per unit
  • Check the boiler water pressure.
  • Check the auto feed if applicable.
  • Clean the flue and base of the chimney.
  • Check the exhaust motor.
  • Clean the burners and adjust the airflow.
  • Check the gad pressures.
  • Check the ignition system.
  • Clean pilot assemblies.
  • Check the low voltage wiring and line voltage wiring at the unit.
  • Check the service disconnects.
  • Check the thermostat operation.
  • Check the circulating pump oil.
  • Purge the radiators and baseboard piping.
  • Check relief valve operations.
  • Check operating controls.
  • Check and operate the system.
 

Central Air Conditioning Systems

(Spring) $140.00 per unit
  • Check indoor blower motor, belts, and pulleys.
  • Check blower motor, bearings, and wheels. Oil Motors.
  • Check the outdoor condenser blower motor and fan blades.
  • Check the indoor handler evaporator coil and condenser coil.
  • Check the indoor evaporator pan for drainage.
  • Check the cooling thermostat, fan switch and temperature operation.
  • Check the temperature split across the evaporator coil.
  • Check the condensate pump operation and discharge line. (There is no guarantee implied that the unit will continue to operate properly.)
  • Check refrigerant pressures, low side and high side.
  • Check the compressor
  • Check the filters. (Replacement filters and humidifier pads are not included and will be charged additionally.)
  • Check the filter dryers.
  • Check all electrical connections and disconnects.
  • Check refrigeration device.
  • Check the capacitor.
  • Check and operate the system.
 
Click here to view our service maintenance contract.

 

Grinder Pump Annual Maintenance Contracts

We offer service agreements for grinder pump systems:

Your annual maintenance contract includes the following work to keep your pump running optimally
 
  • Access the grinder pump and power wash the tank. (Tank must be accessible or time to gain access will be additionally charged)
  • Remove the grease and debris build-up in tank, using non-toxic, environmentally friendly degreaser and sludge removers
  • Check all the floats and the operating levels in the tank.
 
  • Check the pump's electrical wiring, voltage and amps.
  • Check condition of the piping and fittings.
  • Make sure the high water alarm is working properly
  • Check and service the check valves on the discharging piping.
  • Check the operation of the electrical operating panel for the pumps.
 
 
 
*Note: If there is a significant amount of sludge and grease in the tank, we will have a septic pumping company clean the tank. This will be billed separately from this contract.
Maintenance contract customers will receive priority services, as well as 15% discount throughout the year for any grinder pump parts and labor. Should floats, valves, electrical parts or piping need to be replace the cost for labor and materials will be given prior to replacement.
Horn Plumbing & Heating, Inc. will inspect and service the pump system so that it is working optimally and per manufacturer's specifications. We cannot, however, guarantee future conditions or that there will not be system failures after the date of inspection. Should any occur, they will be the homeowner's responsibility.

Yearly Contact Cost:……….$ 375.00/per pump system

 
 
 
For more information about products and services or to schedule you consultation please contact us at 610-363-4200.

Proudly serving Chester, Delaware and Montgomery Counties of Pennsylvania since 1981.